apt-mirror 制作麒麟桌面版内网源

apt-mirror 制作麒麟桌面版内网源


一、修改apt软件安装源

1、修改source.list安装源

vi /etc/apt/sources.list
添加:
deb http://archive.kylinos.cn/kylin/KYLIN-ALL 10.1 main universe multiverse restricted
deb http://archive2.kylinos.cn/deb/kylin/production/PART-V10-SP1/custom/partner/V10-SP1 default all

2、更新软件源信息

sudo apt update

二、安装同步源工具“apt-mirror”

apt-mirrot是deb同步工具,使用apt-mirror可直接同步相关软件源上的deb至本地。

安装apt-mirror软件源同步工具
sudo apt install -y apt-mirror

三、修改需要同步的源地址和配置

“mirror.list”是apt-mirror的配置文件,该文件修改同步路径,软件包架构等,想用哪一个源文件就取消相对应的注册,本次下载V10 SP1版本

sudo vi /etc/apt/mirror.list
修改需要配置文件
# 以下注释的内容都是默认配置,如果需要自定义,取消注释修改即可
set base_path /data/apt-souce/
#镜像文件下载地址
set mirror_path $base_path/mirror
#软件包存放路径(默认即可)
set skel_path $base_path/skel
#临时索引下载文件目录,也就是存放软件仓库的dists目录下的文件(默认即可)
set var_path $base_path/var
#配置日志(默认即可)
set defaultarch arm64
# 需要下载架构包,这里是下载arm64
set nthreads 20
set _tilde 0
#下载线程数
#V10版本:
#deb http://archive.kylinos.cn/kylin/KYLIN-ALL 10.0 main restricted universe multiverse
#V10 SP1版本:
#deb http://archive.kylinos.cn/kylin/KYLIN-ALL 10.1 main restricted universe multiverse
#clean http://archive.kylinos.cn/kylin/KYLIN-ALL
	
#V10 SP1版本: kylin-desktop-V10-SP1-arm64
deb https://archive2.kylinos.cn/deb/kylin/production/KY-V10-SP1-arm64/custom/kylin-desktop/V10-SP1-arm64 10.1 all main restricted universe multiverse
clean https://archive2.kylinos.cn/deb/kylin/production/KY-V10-SP1-arm64/custom/kylin-desktop/V10-SP1-arm64
	
#V10版本: kylin-desktop-V10-arm64
#deb https://archive2.kylinos.cn/deb/kylin/production/KY-V10-arm64/custom/kylin-desktop/V10-arm64 10.0 all main restricted universe multiverse
#clean https://archive2.kylinos.cn/deb/kylin/production/KY-V10-arm64/custom/kylin-desktop/V10-arm64

四、同步软件源

直接在终端上执行apt-mirror即可下载相对应的软件包,重点注意软件的包大小,大部分的软件包大小在70G-150G之间,因此下载前先准备好存储空间

sudo apt-mirror

下载中途断开只需要删除apt-mirror.lock文件即可

 sudo rm /data/apt-souce/var/apt-mirror.lock

五、web访问源

1.安装apache2

sudo apt install apache2
systemclt restart apache2
systemclt enable apache2

2.修改访问路径

sudo ln -s /data/apt-soucearchive2.kylinos.cn/deb/kylin/production/KY-V10-SP1-arm64/custom/kylin-desktop/V10-SP1-arm64 /var/www/html/kylin-desktop-v10-sp1-arm64

六、使用软件源

编辑 /etc/apt/source.list,加入以下内容

sudo vi /etc/apt/source.list
#ip和port是自己本机的,其中端口默认为80
deb [arch=arm64] http://[ip]:[port]/kylin-desktop-v10-sp1-arm64 10.1 all main restricted universe multiver
作者:manwander原文地址:https://www.cnblogs.com/manwander/p/16916909.html

%s 个评论

要回复文章请先登录注册